Production process of coated iron —— electromagnetic heating roller
作者：管理员 时间：2020-06-04 09:14 来源：未知
浏览：次
Coated iron production is the use of high temperature, high pressure, rapid cooling composite process.
The production line of coated iron is mainly composed of chrome-plated iron uncoiling part, welding and iron apparent quality inspection, substrate heating, coated film unit, cooling unit, product inspection and oil coiling, etc. The core part is the heating area of the substrate and coated film unit. The preheating part of the electromagnetic induction heating roller heats the steel strip to the temperature above the melting point of the film, and the base plate is fitted with the heat melting point of the film when the two pressure cots are extruded symmetrically. The hot strip is cooled quickly by a cooling device to ensure rapid recrystallization of the melted polymer.
Hunan QiJieXin electronic technology co., LTD. (www.zgqjkj.com/www.qjxdz.com); Electromagnetic heating roller production base, specializing in the manufacture of electromagnetic heating high temperature roller, our company has successfully broken through the high temperature of 500 degrees, can replace your original oil heating roller and resistance wire heating roller, energy saving more than 60%, roll surface temperature uniformity ±1℃, control precision ±0.1℃. No oil tank, no oil stain in the workshop. Energy saving and environmental protection, intelligent operation, safe and reliable, improve output, improve product quality, low maintenance cost, less trouble, long service life.
