Product use
This equipment is suitable for the PTFE film and needle felt filter material, the high temperature bonding process of non-woven fabric. The machine is divided into two groups of high temperature bonding part and low temperature bonding part. The continuous heating process is made up of the following two groups. The high temperature heating roller is made of special high temperature seamless steel pipe, and the thickness of single wall is over 40mm. The heating method adopts the most advanced electromagnetic induction heating method in the world. (to make up for the previous annular heat pipe differential damage and deformation, heating temperature is uneven, replacement and maintenance trouble), the heating roller is fast heating, the surface temperature is uniform, the surface temperature reaches 400 degrees centigrade, and does not deform.

Qi Jie electromagnetic heating roller product advantages:
1. The heating speed of the electromagnetic heating roller is fast (the temperature of 180 centigrade is only completed within 30 minutes).
2. The precision of temperature control is higher than 0.1.
3. The production efficiency is high and the production line speed can be improved.
4. There is no oil pollution in the energy saving and environmental protection workshop.
5, intelligent operation, simple and convenient operation only needs to set the temperature of the instrument does not need other tedious adjustment procedures.
6, the stability of the work is high, the electrical original has no mechanical friction and loss.